You don't want your phone to go dead on the mountain so it's always good to pack a battery pack.

MyCharge calls its new line of magnetic power banks Superhero MagLock, implying that they're real saviors. I was impressed by their design. Not only do the batteries, which come in various capacities, have strong magnets and stick really well to the back of your iPhone 12 or 13, but they have raised coils, which are supposed to help reduce heat levels while charging. It does seem to work.

The 3,000-mAh battery is lightweight and slim and is nice to have around for some emergency charging. However, it won't get you a full charge, so you'll probably want to step up to one of the higher-capacity options like the 6,000-mAh model, which retails for $60 but is currently being discounted to $40. The 9,000-mAh version is beefy and feels like your phone is attached to a small brick -- the battery and phone do fit in your hand nicely, but the combo certainly isn't pocket-friendly.

All the MagLock batteries charge Qi-enabled iPhones at 5 watts, although you can get faster charging if you go wired and use a USB-C-to-Lightning cable. I also liked how there's a chime when the charging starts and your phone tells you how much juice is left in the battery pack (it's tied into iOS 15). You can wirelessly charge Android devices as well but the MagLock won't stick unless you have a metal ring on the back of your phone's case (stick-on rings are available).

The SuperHero MagLock is available in a few colors and has a glossy finish. It's currently the best designed magnetic power bank -- better even than Apple's.

What's cool about Anker's 622 magnetic battery is that it's a wireless battery that has an integrated magnetic flap that converts into a stand. You won't get fast wireless charging from this 5,000-mAh battery (it charges at up to 7.5 watts) but it's slim and easy to carry around. 

It charges via USB-C and if you use a USB-C to Lighting to charge your iPhone, it will charge at a faster rate of 12 watts. That's not as fast as what a 20-watt USB-C power adapter can deliver, but it's faster than 7.5 watts.

Mophie's magnetic power bank is similar to Anker's but is slightly slimmer and doesn't have an integrated flap that converts into a stand. Like the Anker, this isn't an official Apple MagSafe accessory, but it magnetically adheres to the back of your MagSafe-enabled iPhone or MagSafe case -- yes, it sticks nicely -- and is svelte for 5,000-mAh battery. It can also be used with other phones that support wireless charging as it comes with a stick-on magnet. 

Wireless charging speeds are limited to 7.5 watts for iPhones, but if you need a faster charge, you can connect a USB-C to Lightning cable to bump the speed up to 12 watts. This has enough juice to fully charge an iPhone 13 or 13 Pro once, but it'll fall a little short of a full charge with an iPhone 13 Pro Max. 

Clckr makes iPhone cases integrated with its signature Stand and Grip but they aren't MagSafe-compatible. However, the Clckr Stand and Grip is -- it adheres directly to your iPhone or a MagSafe-enabled case.

It's one of the best MagSafe stands out there, allowing you to prop your phone up vertically or horizontally. And, as its name implies, the stand also converts into a ring-like grip so you can hold your iPhone more ergonomically. It has strong magnets and adheres well to your phone or case.

This accessory from Moft not only acts as a magnetic wallet that adheres to the back of your MagSafe-enabled iPhone (or case), but it converts into a stand that can be used to prop up your phone horizontally or vertically. The wallet fits a couple of credit cards (you can stretch it a bit to get three in there) and the accessory has a fairly strong magnet, so it stays on your phone pretty well.

I'm showing it in light blue but it's available in several colors. You can also buy this as a bundle for $60 with Moft's MagSafe case, which is a nice case.

The Anker 610 magnetic phone grip is one of the more affordable MagSafe accessories. It has a strong magnet and you can use the retractable ring to hold your phone securely in your hand or as a kickstand. It allows you to prop up your phone horizontally but not vertically. Some other MagSafe stands do both.

If you're a PopSockets fan, you have a couple of MagSafe options. There's the more standard PopGrip ($30) and the PopWallet Plus for MagSafe ($40), which combines a magnetic wallet that stores a few credit cards and a PopGrip that gives you a grip and kickstand option.

Available in multiple color options, this simple, lightweight flip-out kickstand has a strong magnet and takes up minimal space on the back of your phone (it works better for propping your phone up horizontally).

Apple's official MagSafe wallet is more expensive than a lot of third-party magnetic wallets, but the one thing it has that the other ones don't is compatibility with Apple's Find My network. But don't expect to track it down like an AirTag: It really just signals if and when it becomes detached. It's available in five colors.

The Anker 637 has a magnetic charging pad on one side and seven charging ports on the back: two USB-C, two USB-A and three standard AC outlets. The USB-C ports deliver up to a 65-watt charge when charging one device -- or 45- and 20-watt if charging two devices simultaneously. So yes, you can use it to charge most laptops that charge via USB-C.

For MagSafe-enabled iPhones, the wireless charging pad charges at 7.5 watts. You can only charge Android phones if you stick a metal ring accessory (sold separately) on the back of your device and place it in the right spot.

iOttie offers this MagSafe-compatible wireless car charger with a car vent mount. It has a strong magnet, so your iPhone stays on the mount, and it also has an integrated USB-C cable and cigarette-lighter power adapter so you're ready to start charging out of the box. Note that iPhone "fast" charging caps out at 7.5 watts.

Spigen's OneTap magnetic car mount comes in a few different versions, including an air vent and dashboard versions. This version is just a magnetic mount, not a wireless charger. You have to step up to the Spigen OneTap Pro ($40) to get wireless charging.

This model features a telescopic arm and fairly strong magnet. However, it's not quite as strong as the one in Belkin's car mount (see below). While it's quite affordable at less than $25 (there's currently an instant 30% off coupon), there's no cigarette lighter power adapter included (a USB-C cable is, however).

Belkin's Car Vent Mount Pro with MagSafe technically isn't a charger. It's just a certified MagSafe vent mount. Belkin also has a wireless charging version of this (it costs $40 without the car charger, $60 with it), but you'd have to connect a cable to it anyway for charging. The advantage of a wireless version would be that unlike with this vent mount, you wouldn't have to plug a cable into your phone every time you want to charge it. I have a USB-C-to-LIghtning cable set up in the car for fast charging, but I don't love the extra step of having to plug in the cable each time I want to charge the phone.

All that said, what sets this Belkin apart from other generic, non-MagSafe-certified mounts that look similar (and some even offer wireless charging), is that the Belkin has a very strong magnet while many of these other vent mounts don't. If you have a MagSafe case on your phone, or just a naked newer iPhone model, the phone really sticks to the mount. The clip also keeps the mount securely in your vent and you can rotate the mount from portrait to landscape mode as needed.

Joby makes bendable tripods for cameras and smartphones and its products are a staple of vloggers and other content creators. Sometimes it's a little cumbersome to get your phone out of their clamping mounts, which is what's appealing about the company's new MagSafe options. You can simply stick your phone to the mount; it adheres magnetically.

My iPhone 13 Pro stuck pretty securely to the GripTight mount. I was testing it with an Otterbox MagSafe-enabled case, so I wasn't really worried about the phone getting jostled and falling off the mount. But if you want a more secure fit, you have the option of using the "hybrid" clamp to really lock your phone onto the mount. The clamp works in both vertical and horizontal modes and when you're going the magnetic route only, you can easily swivel your phone into a horizontal or vertical position.

Joby is currently selling three GripTight for MagSafe accessories. There's a simple wall-mount option, a GripTight Mount for MagSafe that can be added to any GorillaPod (or tripod for that matter), as well as a bundle that includes a GorillaPod and GripTight Mount (arms for the GorillaPod are sold separately). All three new MagSafe options are also compatible with Joby's Wavo Mobile, Beamo Mini and RangePod accessories.

Belkin's magnetic phone mount with face tracking is designed for folks who shoot their own selfie videos for TikTok, Instagram and other social media platforms with a MagSafe-enabled iPhone. (The device has a companion iOS app but not an Android app.) There are competing products out there like the Pivo Pod Lite ($80), but this is MagSafe-enabled so all you have to do is stick your phone on the mount -- you can simply turn your phone to place it in landscape or portrait mode. The pedestal automatically turns as your phone follows your face while you're shooting yourself. 

To be clear, this is not for FaceTime or WhatsApp or WeChat video calls. It doesn't have to be plugged so it's easy to move around the room and place wherever you want. However, it's not equipped with rechargeable batteries. It's powered by three AA batteries that do give the pedestal some added weight for stability.

Moment makes a few different photography-oriented MagSafe accessories, including a couple of tripod mounts. With the Pro tripod mount you can choose to just use the magnets or lock your phone in for added security. This may not work as well with the larger Pro Max model, but the standard iPhone 13 and 13 Pro are lighter and are less likely to become detached (magnets are only so strong).